[200q20v] gear shifting problems

[WARATAP at aol.com]

In a message dated 8/5/00 7:02:46 PM Eastern Daylight Time, 
quattro at pdikeman.ne.mediaone.net writes:

> What do I look for?  I'm short on tools+time at the moment, and I 
>  need to be back in NY tomorrow.
>  
>  Brett
>  -- 

Unless you lost all your tranny fluid, I think your problem is more likely a 
bad slave/master cylinder.  I replaced both on mine  (first the slave when I 
had the clutch done).  Checked the top of the master (right above the pedal) 
and it was leaking, so replaced that one.  Try bleeding through the slave 
first and see if that helps.


-Ingo
'91 200 with a few mods...
http://hometown.aol.com/quattringo/index.html