[200q20v] Brake Light / accumulator Part II

[C1J1Miller at aol.com]

George:  re reading your note, I may have replied in haste.  Which brake warning light comes on, the autocheck, or the handbrake one?

Which sensor was unplugged, the one off the top of the brake fluid reservoir cap?  If that one is the problem, I think it just monitors fluid level.  
Chris




In a message dated Mon, 11 Dec 2000  2:02:48 PM Eastern Standard Time, George Sidman <sidman at montereynet.net> writes:

<< The Brake light on my 91' 200TQW came on some time ago, and
a during a visit to the mechanic, I mentioned it. When I
picked up the car the light was out. This weekend I noticed
that the master cylinder sensor was disconnected. I
reconnected it and the brake light came on. Blau tells me
that the sensor detects low hydraulic pressure, but there
appears to be nothing wrong with the brakes or steering. The
accumulator might need replacing? The sensor could be bad?
The Chris Miller and SJM sites don't have anything on this
subject. Any wisdom/advice.......??
-- 
George Sidman, President
Nousoft, Inc.   -   Monterey Network Center
www.nousoft.com  -  www.montereynet.net
sidman at montereynet.net
9701 Blue Larkspur Lane
Monterey, CA  93940
831 657-1510
_______________________________________________
200q20v mailing list
200q20v at audifans.com
http://www.audifans.com/mailman/listinfo/200q20v
 >>