[200q20v] Climate Control problem

[Sami]

Hi guys,

after 2 years of driving a japanese car I finally bought me an Audi...It's a 
200t 1988 so it's not 20V but since the A/C is the same and since I know a 
few of you guys from past I decided to put my question here...

My problem is that though the A/C motor is running at high speed the amount 
of air that comes out of ventilation holes is rather poor. I've run the 
diagnostics and everything seems to be OK. Only error that I get is the 
coolant temperature sensor G62 being open. I removed the  accordion hose 
between A/C evaporator box and heater box to determine if the A/C evaporator 
was "dirty" but it didn't help. I quess the heater radiator cannot be dirty 
because the temperature regulator flap should bypass it when setting 
temperature to "LOW" and still the amount of air coming out of ventilator 
holes is poor. The fresh air flap opens normally.

I's really stuck with this problem and my windows are misty...Please help me 
if anyone has a clue..

Cheers

Sami Räsänen from Finland
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.