[200q20v] Fuel Injectors and Oxy Sensor

[C1J1Miller at aol.com]

In a message dated Thu, 5 Oct 2000  9:47:46 AM Eastern Daylight Time, Max Conover <maxesales at home.com> writes:

<< Has anyone ever replaced the fuel injectors themselves ? Even after
unbolting the fuel rail from the intake manifold and taking off the fuel
lines, the fuel injectors just do not want to come out. What gives ? Any
tricks that I should know.

Also, has anyone wired in the universal Oxygen sensor, bosch 13913, into
the the original harness. If so, what connectors are used and which goes
where.

Thanks !!!!
 >>
No btdt for injectors; think they just press in, and are retained by o-rings.  The o-rings are old, probably stiff.

O2 sensor:  just splice the wires; one black, two white I think.  Butt-splice connectors, red, work well.  Stagger the splices and the heat protective outer casing will slip over the splices.

hth, chris miller, windham nh, c1j1miller at aol.com
http://members.aol.com/c1j1miller/