[200q20v] [Fwd: Re: sources?]

[Fundsalo Racing]

NEA in Concord NH - 603-228-0533

http://www.northerneuropeanautomotive.com/

-glen

OOOO


--- copley one <copley at snet.net> wrote:
> 
> 
> -------- Original Message --------
> Subject: Re: sources?
> Date: Mon, 02 Apr 2001 16:47:38 -0400
> From: Aaron Traussi <acopley at snet.net>
> To: Copley One <copley at snet.net>
> 
> The only sources I have would only have a large
> amount about a hundred
> but a
> good source and online would be
> http://www.bellmetric.com/ as well they are
> very "Euro" friendly
> 
> 
> On 4/2/01 4:45 PM, "copley one" <copley at snet.net>
> wrote:
> 
> > Message: 13
> >  Date: Mon, 02 Apr 2001 11:47:52 -0400
> >  From: Peter Schulz <peschulz at cisco.com>
> > Subject: Those elusive copper crush washers
> > 
> > 
> > 
> > Found out the hard way this past weekend that it
> is best to start a job
> > requiring crush washers with an extra supply...
> > 
> > With the help of Chris Miller, I replaced the fuel
> pressure regulator on
> > 
> > the 200...of course when I ordered the replacement
> part, I neglected to
> > order the "sealing washers"..I hope to reuse the
> existing ones, which
> > promptly leaked. Found a NAPA that helped us out
> by breaking open the
> > package on a Bosch Fuel filter and giving us a set
> of washers.  Of
> > course
> > this also did not seal the banjo bolt on the fuel
> rail...Went to two
> > more
> > parts places to no avail....
> > 
> > I decided to push my luck, clean the area around
> the fuel rail
> > connection
> > with a file and emory board, and reuse the washers
> - luckily it held w/o
> > 
> > leaking fuel.  I ran a few subsequent high boost
> runs to ensure that it
> > was
> > indeed tight.
> > 
> > I will have to remove the washers again when I
> pull the injectors, but
> > want
> > to ensure that I have some extra washers on
> hand... which gets me to the
> > 
> > point of this email...
> > 
> > Other than the dealer, where can I get the myriad
> of crush washers that
> > the
> > cars need?  In this case the FA called for an A12
> x 15.5...????
> > 
> > John, Scott, anybody - source recommendations?
> > 
> > TIA!!!
> > 
> > Peter Schulz
> > 1990 CQ
> > 1991 200 20v TQW
> > Chelmsford, MA USA
> > peschulz at cisco.com
> > 
> > 
> >
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v


__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail. 
http://personal.mail.yahoo.com/