[200q20v] Bosch headlights with Blau harness

[C1J1Miller at aol.com]

In a message dated 4/4/01 11:07:55 PM Eastern Daylight Time, 
charlie at istari.com writes:

> Blau sent a modified relay to exchange for the standard dead bulb
>  monitor.  Since there are relays in the system now, the control unit
>  can't detect a problem anyhow, but I'm going to try dummy loads in
>  the dangling passenger connector instead of using the modified part.
>  
>  
>  Charlie

Simplest fix is to cut one wire from behind the bulb monitor relay; if you 
want to return to stock at some point, splice the wire.  If you can't figure 
out that one bulb is out without the monitor...
Chris