[200q20v] wiring / Alarm / trunk question (keyless entry)

[Bernie Benz]

I don't know where or how to get you started, if you don't know an amp from
a volt.  you need a knowlegable, helpful, and nearby friend.  Have you read
and down loaded all the stuff from Chris' site?  I have contributed some
integrating wiring diagrams thereto.

The easiest install RKEs are those that have the output relays built in,
neater, more compact, and less wiring to do.  You should be looking for
instructions for integrating with an "electrically activated vacuum locking
system", some call it a Type E system, as used by MB and Audi.  I think that
the "one wire systems" Type F, also called Cut to lock, Ground to unlock,
were used only on rice burners.

Bernie

> From: CL Wong <montesawong at yahoo.com>
> Date: Tue, 10 Apr 2001 08:45:55 -0700 (PDT)
> To: Bernie Benz <b.m.benz at prodigy.net>
> Subject: Re: [200q20v] wiring / Alarm / trunk question (keyless entry)
> 
> Bernie,
> 
> I need to first understand how to read bentley.  Maybe
> it's because I don't have an engineering background
> but those wiring diagrams are virtually meaningless to
> me.
> 
> Can you give me a hint where I could integrate?  The
> rke directions seem to indicate the use of relays for
> audi "one wire" applications.
> 
> thanks
> 
> Chi.
> 
> --- Bernie Benz <b.m.benz at prodigy.net> wrote:
>> Chi,
>> 
>> I think that you need to do a little more in depth
>> study into the 200's
>> lock/alarm system and consider just how your RKE
>> system can be integrated
>> into it, as your questions and intent are not clear.
>> 
>> IMO, intergrate your RKE into the Audi system, do
>> not use electromechanical
>> actuators to operate the audi door lock mechanisms.
>> This requires that your
>> RKE system have LOCK and UNLOCK relay outputs and
>> that their pulse lengths
>> be adjustable.  See Chris Miller's web page for
>> previous documentation.
>> 
>> Bernie
>> 
>>> From: CL Wong <montesawong at yahoo.com>
>>> Date: Tue, 10 Apr 2001 06:29:09 -0700 (PDT)
>>> To: 200q <200q20v at audifans.com>
>>> Subject: [200q20v] wiring / Alarm / trunk question
>> (keyless entry)
>>> 
>>> Hi folks.
>>> 
>>> I recently bought an Avital keyless entry device
>>> (ebay, $38 delivered) and plan on fitting it to my
>> 200
>>> using the wiring diagram for the autoloc keyless
>> entry
>>> on the 20v.org site.
>>> 
>>> Bentley seems to indicate that I could use 2 wires
>>> from the trunk lock to send a signal to the alarm
>>> control unit to fool it into arming and unarming.
>>> 
>>> Can someone confirm that the trunk lock has this
>>> capability?  I don't recall ever hearing the alarm
>>> "meep" when I locked the trunk separately and I'm
>> not
>>> sure how to check the system is actually armed.
>>> 
>>> 
>>> thanks
>>> Chi
>>> 
>>> 
>>> 
>>> __________________________________________________
>>> Do You Yahoo!?
>>> Get email at your own domain with Yahoo! Mail.
>>> http://personal.mail.yahoo.com/
>>> _______________________________________________
>>> 200q20v mailing list
>>> 200q20v at audifans.com
>>> http://www.audifans.com/mailman/listinfo/200q20v
>> 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/