[200q20v] Re: 200q20v digest, Vol 1 #501 - 3 msgs

[Derek Pulvino]

Hey guys,

Had that problem in the way back.  Was able to solve it by removing the 
cluster and cleaning the connectors on the wiring and cluster side with 
contact cleaner.

I'm also assuming your talking about the oil pressure warning associated 
with the multi-function computer display.

No soldering involved.

Derek P

Message: 2
From: "Peter Petersen" <pwpetersen at earthlink.net>
To: "200Q20V" <200q20v at audifans.com>
Subject: RE: [200q20v] Oil Warning light
Date: Tue, 31 Jul 2001 10:36:07 -0600

Rob:

The problem can also lie within the dash board cluster.  I just changed both
the pressure switch and the pressure sending unit and still have the
problem.  Have'nt had time to pull the cluster, but I plan to clean the main
connector and solder repair the boards one weekend this winter.


Pete

-----Original Message-----
From: 200q20v-admin at audifans.com [mailto:200q20v-admin at audifans.com]On
Behalf Of Rob Winchell
Sent: Tuesday, July 31, 2001 10:18 AM
To: 200q20v at audifans.com
Subject: [200q20v] Oil Warning light


Lately the Oil Warning icon/beep has been going off on
the dash computer. The oil temp and pressure is fine
(says the gauges) and the oil leve is fine (says the
dipstick).

So, I'm guessing a sensor someplace is wacky. Any
ideas which one? Or is there some other possibility
that I am missing?

Thanks,
Rob Winchell
200q20v




_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp