[200q20v] Two front struts replaced in 15 minutes, no sweat

[Dale McCormack]

With all the "strut chatter" of late, thought I'd confirm that you all
know our 91 20V models can have their front struts replaced without a
spring compressor, or any front end disassembly. As described in the
Bentley manual, a special Audi tool is necessary (~$45), but the process
is incredibly easy when compared with traditional McPherson Strut
changes.  The car's alignment is unaffected too.

Some discussions have mentioned replacing other components, and this
won't help there.  However, if you're just replacing the dampeners, even
with aftermarket components, this is the way to go.  If you use
Bilsteins you'll need to access the strut body through the wheel well,
lift the rubber strut boot, and perform final tightening of the strut.

HTH,
Dale