[200q20v] RE: 200q20v digest, Vol 1 #443 - 2 msgs

[Brian.Link at Level3.com]

Jerry,
Alan @ redline cars has the large inner rear control arm bushings, there
about $30 or so.  I got both the inner pair and the outer two pair from him
a few months ago.  I replaced the outers but not the inner yet.
HTH
Brian Link
Boulder, CO 

subject says it all. not sure if techincal name is control arm or trailing
arm. It is the big a$$ ones towards the center of the car. no response from
alan @ Redline.com. is this dealer only? part # handy? second choice will be
Mac @ Clair unless recent BTDT. also doing front outer tie rods (have
those). only want to do alignment one time.  TIA
Regards,
Jerry
91 200qa

To unsubscribe, email: s-car-list-unsubscribe at egroups.com



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


--__--__--

Message: 2
Date: Sun, 17 Jun 2001 06:11:41 -0800
Subject: [200q20v] RE: [s-cars] need rear control arm bushing
From: Bernie Benz <b.m.benz at prodigy.net>
To: <george at connectel-us.com>, "Beer, Jerald" <t>
CC: 200q20V mailing list <200q20v at audifans.com>

I think that you guys are talking about different parts.  George, I think
that you are providing P/Ns for the ball joint ends for the upper control
arm, the rear camber adjustment kink.

Jerry was, I think. inquiring about the inner rubber bushing on the lower,
trailing control aarm.

Bernie  

> From: "George Grubr" <george at connectel-cz.com>
> Reply-To: <george at connectel-us.com>
> Date: Sun, 17 Jun 2001 12:31:59 +0200
> To: "'Beer, Jerald'" <gsfent at prodigy.net>, "'200q20v \(E-mail\)'"
> <200q20v at audifans.com>, "'S-Car-List \(E-mail\)'"
<s-car-list at yahoogroups.com>
> Subject: [200q20v] RE: [s-cars] need rear control arm bushing
> 
> part # for rear "track control arm" for 91 200qa:
> 
> 443 505 351 P  left upper
> 443 505 352 P  right upper
> 
> or you can get separate ball joints:
> 
> 443 505 365 D  left inner
> 443 505 366 D  right inner
> 
> 443 505 153 B  outer (sam for R/L side)
> 
> if  I remember correctly it was cheaper to buy the assembly.
> 
> George
> 95.5 S6 Avant
> 
> -----Original Message-----
> From: Beer, Jerald [mailto:gsfent at prodigy.net]
> Sent: Friday, June 15, 2001 21:46
> To: 200q20v (E-mail); S-Car-List (E-mail)
> Subject: [s-cars] need rear control arm bushing
> 
> 
> subject says it all. not sure if techincal name is control arm or trailing
> arm. It is the big a$$ ones towards the center of the car. no response
from
> alan @ Redline.com. is this dealer only? part # handy? second choice will
be
> Mac @ Clair unless recent BTDT. also doing front outer tie rods (have
> those). only want to do alignment one time.  TIA
> Regards,
> Jerry
> 91 200qa
> 
> To unsubscribe, email: s-car-list-unsubscribe at egroups.com
> 
> 
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> 
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v



--__--__--

_______________________________________________
200q20v mailing list
200q20v at audifans.com
http://www.audifans.com/mailman/listinfo/200q20v


End of 200q20v Digest