[200q20v] Road Noise

[Paul Waterloo]

I replaced my front bearings on my car, wasn't that hard, but I dropped the
strut assembly and then had a 100 ton press and a set of very large sockets
to use to press on the outer races to press the bearings in and out.

My road noise was still there, and I then I rotated the tires and found that
it was a bad belt in a tire. Change the tire and the noise went away.

Go figure!

Paul
_____________________________________________________
Paul Waterloo
Applied Energy Services
Phone 708-524-9464
Fax 708-524-0079
Cell 312-961-2523
pwaterloo at compuserve.com


----- Original Message -----
From: <Brian.Link at Level3.com>
To: <200q20v at audifans.com>
Sent: Tuesday, June 19, 2001 11:58 AM
Subject: [200q20v] Road Noise


>
> Has any one changed out front wheel bearings on a UFO equip car?
> I have access to the schley bearing puller, just looking for advice.
>
> Also, my car is making a loud road noise, I haven't rotated the tires to
see
> if that fixes it, but I will.  I'm thinking it is a wheel bearing or drive
> shaft center support bearing.   Kind of a Grrr, Grrr, Grrr at slow speeds,
> at higher speeds it is droned out.
>
> Thanks
>
> Brian Link
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v