[200q20v] new shocks/springs on order; what consumables should be replaced?

[Linus Toy]

At 11:27 AM 2/28/2001 -0500, Brett Dikeman wrote:
>Hi Linus,
><SNIP>
>The H&R's that I purchased were #29800.  I decided to go with bilsteins
>because

Those are the springs for the 20v type 44q--IOW, you're ordering the 
"correct" springs for our car, where I installed 29921, the springs for the 
V8.  According to my notes, the rears on the two spring sets are almost the 
same (310 vs 330 lb/in at installed height--remember, these are progressive 
springs), but the fronts are substantially stiffer on the V8 set (220 vs 
300 lb/in at installed height).  My experience probably won't be directly 
applicable for you, and you may not have the same issues I had.  Have fun 
with them.

--Linus
*--------------------------------------------------------------------*
*  Linus Toy                      Insanity is doing the same thing   *
*  Mercer Island, WA              you've always done and expecting   *
*  linust at mindspring.com          different results                  *
*                                      - Roger Milliken              *
*--------------------------------------------------------------------*