[200q20v] Help! Heater Box Removal Question

[Rob Winchell]

There are no screws holding the box to the body. The
only thing holding it in is the metal strap across the
top and the seal around the edge.

Rob Winchell
200q20v


--- Calliope <calliope3 at starpower.net> wrote:
> I've followed along on the Bentley, removed all
> wires, hoses and straps,
> the center console, and the drivers side knee bar.
> When you are at the
> end of the procedure, the Bentley says something
> vague like "remove all
> mechanical connections between the body and the
> heater box".
> 
> Problem is, I don't see any. I presume I'm looking
> from the interior -
> why else would I have removed the center console,
> but also  I see
> absolutely nothing on the perimeter of the box from
> the top/engine side.
> 
> Do I have to remove ducts to see the screws or
> whatever? Which ones? How
> about the vacuum servo motors, do they have to be
> disconnected from the
> box? About how many screw/bolts are there. . None of
> this is mentioned
> in the Bentley.
> 
> Meanwhile, I'm gainfully employed soldering new
> bulbs into my dash
> switches...
> 
> Thanks
> 
> Tom F.
> 
> 
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v


__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail. 
http://personal.mail.yahoo.com/