[200q20v] Re: advice in pulling 3B injectors?

[Bernie Benz]

At $24 apiece make sure that they install the O-rings!  Can you define
"cleaned, balanced and blueprinted"?   Make them show you a before and after
spray pattern on each, as a part of the contract.  If not improved don't
pay.  Why do you think that you need this?

The generic O-ring is a Viton 2-203, two/injector.

Bernie

> From: Peter Schulz <peschulz at cisco.com>
> Date: Wed, 07 Mar 2001 16:39:58 -0500
> To: Bernie Benz <b.m.benz at prodigy.net>
> Subject: advice in pulling 3B injectors?
> 
> 
> Bernie:
> 
> it looks as if I will be pulling the injectors out of my 200 and sending
> them out to be cleaned, balanced and blueprinted at about $24 per injector,
> alot less then the pain of new $128!
> 
> any advice on the removal procedure and do you have a source and part
> numbers for new Viton seals?
> 
> are any special tools required?
> 
> Thanks!
> 
> Peter Schulz
> 1990 CQ
> 1991 200 20v TQW
> Chelmsford, MA USA
> peschulz at cisco.com
>