[200q20v] Wire EDM machine available for 200q20v parts

[C1J1Miller at aol.com]

Great offer.  I'm not familiar with the machine or it's uses; is this a CNC machining setup, such as for preparing brake caliper brackets?

Think you've got the lowest mileage 200q20v I've seen in years.

Technical info is free; lots compiled here:
http://members.aol.com/c1j1miller/
Chris Miller, Windham NH, c1j1miller at aol.com



In a message dated Wed, 2 May 2001  8:17:17 AM Eastern Daylight Time, Hot Grips® Jim Hollander <hotgrips at cyberportal.net> writes:

<< We have a new Brother Wire EDM machine that is not in use much, and can be
used to make steel (I'd rather not contaminate the filters with aluminum
work) parts for the '91 200q20v if anyone has any suggestions.  It's
capacity is X=10" Y=16" Z=6"
I would be willing to make prototype parts in exchange for the sharing of
the technical information.  Located in New Hampshire.  I have a '91 200q20v
with 25k miles and a '01 S-8 with 300 miles.

_______________________________________________
200q20v mailing list
200q20v at audifans.com
http://www.audifans.com/mailman/listinfo/200q20v
 >>