[200q20v] hesitation on acceleration

[Wolff]

Sounds similar to my trouble. I pulled my distributer last week and one
tooth was gone. Another was totally loose. The gear was cracked in many
places. I'll try to post pics tomorrow. I put in a new dist with the metal
gear. I don't know why Bentley says to remove the intake manifold?! I didn't
have to do that. The hardest part was drilling out the anti-tamper bolt. I
didn't wait for my alignment tool to show up. I just lined up TDC on #1
before I pulled the old dist. Put the new one in the same orientation with
the rotor pointing at the notch on the housing. I have full boost again at
all RPM's. Now I remember why I like that car.
Wolff
"Nobody can forget the sound." - Michele Mouton
----- Original Message -----
From: james austin <jra914 at excite.com>
To: <200q20v at audifans.com>
Sent: Tuesday, May 15, 2001 7:24 PM
Subject: [200q20v] hesitation on acceleration


>
> my 200 20v has started to exhibit moderate a moderate stumble and
hesitation
> under acceleration - starting around 3500 rpm or so.
>
> Any suggestions will be appreciated.
>
> Thanks
>
> Jim Austin
>
> 91 200 tq
> 93 90 s
> 86 944
>
>
>
>
>
> _______________________________________________________
> Send a cool gift with your E-Card
> http://www.bluemountain.com/giftcenter/
>
>
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v
>