[200q20v] Re: [s-cars] Big Reds (actually Blacks)
perry
perry383 at home.com
Tue Nov 6 20:30:18 EST 2001
2Bennett's price was $1980.00 with two piece rotors the last time
I heard..
Perry_____________
Charles Baer wrote:
> BIRA System 6 cost me just under $2K a few months ago, $700 of that
> was for BIRA parts ( hats & brackets ). Nobody else is close to
> the same price, although several of the big brake vendors have been
> making big price cuts recently.
>
> BTW: the 993tt rotors aren't really drilled, the holes are cast.
>
> Charlie
>
> Claus Vegener wrote:
> >
> > Mov'it offer 322x32 mm and GT3 Monoblock calipers for
> > 200q20V (and for bi turbo 993 kit)
> > Claus
> > ----- Original Message -----
> > From: "Alexander van Gerbig" <Audi_80 at email.msn.com>
> > To: <michael at prospeedmktggrp.com>; <qshipq at aol.com>; <adm1txs at ups.com>; <KBATTPO at yahoo.com>; <t44tq at mindspring.com>; <s-car-list at yahoogroups.com>
> > Cc: "Audi 20 Valve list #1" <200q20v at audifans.com>; "Audi Quattro List" <quattro at audifans.com>
> > Sent: Tuesday, November 06, 2001 8:08 PM
> > Subject: [200q20v] Re: [s-cars] Big Reds (actually Blacks)
> >
> > > Nah the BIRA systems don't go down in the thickness they go up in the
> > > thickness. In System 2 the locating pins must be ground down 1mm per side
> > > to make the clearance stock again. There is no BIRA system that goes to
> > > smaller thickness in rotors, that would be rather dumb and dangerous.
> > > System 1 uses a rotor that is 1mm thicker than the standard Boxster rotor
> > > (24 vs. 25mm). System 2 goes 2mm thicker and so on. System 6, the top
> > > system, uses the Porsche disc and custom hats, personally I like that the
> > > best. That uses a mix of components, Porsche 993tt/GT-3 322x32mm rotors and
> > > 996 Turbo monoblock calipers. How big is the 996 Turbo rotor? Are we
> > > saying the caliper shouldn't be used with rotors of different diameters?
> > >
> > > I mean 2B, Mov'it, and so on use a 30mm thick rotor with the 993tt
> > > caliper which wants a 32mm rotor. Those all seem to have a decent track
> > > record and never heard of any failures. Though makes BIRA seem tastier:)
> > >
>
> To unsubscribe, email: s-car-list-unsubscribe at yahoogroups.com
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
More information about the 200q20v
mailing list