[200q20v] FW: shocks and springs question ...

[TM]

Jerry, et al.,
Those were the exact same springs used on my sedan- I believe these
are the 200q20v specific springs, not the V8 ones.

Taka

-----Original Message-----
From: 200q20v-admin at audifans.com [mailto:200q20v-admin at audifans.com]On
Behalf Of Beer, Jerald
Sent: Wednesday, November 07, 2001 5:05 PM
To: 200q20v (E-mail)
Subject: [200q20v] FW: shocks and springs question ...


Robert
  H&R's I used on my wagon was part # 29-800. I have the shorter Koni sports
(yellow) in front and Koni red's in the rear. The front springs were shorter
than the Eibachs I replaced. I'm not sure if these will work if you do not
have the shorter shocks in front. If some one can check the H&R book, I
think these were V8 springs. HTH
regards,
Jerry
91 200qa



> chris,
>
>  would you have the manuf. part #'s for the following shocks and springs
that
> will fit a '91 audi 200 TQ 20V WAGON?  i was told that the Wagon may be
> different from the sedan.
>
>  1. Bilstein (HD) shocks (front and rear)
>  2. H & R springs
>
>  thank you very much in advance again.
>
>  cheers,
>  robert (san francisco)
>
>
_______________________________________________
200q20v mailing list
200q20v at audifans.com
http://www.audifans.com/mailman/listinfo/200q20v