[200q20v] Eurolights protection?

[Mike Miller]

I recently picked up a set from the dealer locally for about $35 to pro4ect
my "new" DOT lights. Seem to fit/work pretty well. Have the 3 hole cutouts -
made it easy to put on.

mike
helmville mt
----- Original Message -----
From: "Brett Dikeman" <brett at cloud9.net>
To: "Phil and Judy Rose" <pjrose at frontiernet.net>; "Bernie Benz"
<b.m.benz at prodigy.net>
Cc: <Chewy4000 at aol.com>; "200q20V mailing list" <200q20v at audifans.com>
Sent: Wednesday, November 07, 2001 9:45 PM
Subject: Re: [200q20v] Eurolights protection?


> At 1:14 PM -0500 11/6/01, Phil and Judy Rose wrote:
> >At 8:34 AM -0800 11/6/01, Bernie Benz wrote:
> >>I am using Stongard, but would not recommend them for 200 Euros because
of
> >>the poor coverage and fit.  Better, find a source for the 3M material
and
> >>cut your own.
> >
> >Hmm, are you referring to something other than the approx. 3/8"
> >margin (around the periphery of the lens) that Stonegard leaves
> >uncovered? I thought coverage and fit were OK except for that, but I
> >don't think it creates a significant risk as it's where the lens is
> >strongest.
>
> I bought a set from blau, kind of sorry I did.  Maybe I goofed and
> was supposed to specify the euro version, but the sheets I have have
> cutouts for DOT lamps.  They also look nothing like the headlight and
> are probably just some "close enough" cut for another car.
>
> I suppose can give them to my father, who could cut em up and use the
> stuff on his euro fog/driving lights on his 944t.
>
> B
> --
> ----
> "They that give up essential liberty to obtain temporary
> safety deserve neither liberty nor safety." - Ben Franklin
> http://www.users.cloud9.net/~brett/
> http://www.users.cloud9.net/~brett/bdikeman.asc (PGP Public Key)
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v
>