[200q20v] RE: Thick rotor systems

[Michael (Prospeed Motorsports)]

Taka,

I have no issue with a rotor 1 mm thicker than stock as long as there
are no clearance issues. I cannot think of how this could create or
increase a potential safety risk.

Michael G. Wachholz
Prospeed Motorsports

952.249.1169 office
952.475.3267 fax

400 Pond Ridge Circle
Wayzata, MN 55391

mailto:michael at prospeedmktggrp.com
www.prospeedmktggrp.com


> -----Original Message-----
> From: quattro-admin at audifans.com
> [mailto:quattro-admin at audifans.com] On Behalf Of TM
> Sent: Wednesday, November 07, 2001 10:47 AM
> To: michael at prospeedmktggrp.com; 'Greg Johnson'; 'QList';
> '200 List'; 'S Cars'
> Subject: RE: [200q20v] Big Red (actually blacks) Eating Crow
>
>
> So Mike- lost in all of this, what is your viewpoint on
> using calipers on rotors thicker than the original intended
> rotor for that caliper, e.g. BIRA System 3- 28mm design for
> the 996 caliper, 30mm rotor?
>
> Greg, Scott J., anyone else want to chime in on this?
>
> Taka