[200q20v] re: lowering springs, specs

[Mike Miller]

I am about 15" front and 14" rear with stock springs and Bilsteins HD - its
hard to find a level place here in MT <g>

mike
helmville mt

----- Original Message -----
From: "Steve Crosbie" <scrosbie at integraonline.com>

> [ Converted text/html to text/plain ]
> Chris,
>     My 200 went from stock to H&R  #29800 with Koni Sports (no change in
> spring pads), measuring center of wheel to top of wheel well:
> Stock             front  15.125",  rear  14.25"
> H&R/Koni     front   14.25",  rear   13"
> These are averages, the actual measurements ranged from 0 to .125"
different
> from left to right side.
> Steve
> C1J1Miller at aol.com[1] wrote:
>
> So, has anyone measured the fender to center of wheel measurements for the
various spring and shock combos used on our cars (including stock)?  Greg
Amy did on his Bilstein/H&R setup (plus 1/8" thinner front spring pads):
> about 14-3/8" front, 13-3/8" rear (see his original note below).
> Chris