[200q20v] Re: Dist. Gear. was Bernie's "fix"

[Bernie Benz]

> From: "Cordeiro, Alan" <Alan.Cordeiro at mts.com>
> Date: Tue, 13 Nov 2001 12:50:23 -0600
> To: "'Bernie Benz'" <b.m.benz at prodigy.net>
> Cc: Derek Pulvino <dbpulvino at hotmail.com>
> Subject: RE: [200q20v] Re: Dist. Gear. was Bernie's "fix"
>
> Bernie,
>
> I am in Ann Arbor, MI, the vendor is in Sacramento CA.
Great, as I'm only about an hour's drive to Sac.
if I can be of assistance.
>
> I told him the camshaft is bathed in oil, is it a
> correct assumption that the distributor gear is
> lubricated where it meshes with the camshaft?
Yes.
>
> I am waiting to see list response before turning
> it into a real project.
I need two.  The 7As on the 20V list should also be interested.

Bernie
>
> Alan
> -----Original Message-----
> From: Bernie Benz [mailto:b.m.benz at prodigy.net]
> Sent: Tuesday, November 13, 2001 2:08 PM
> To: Cordeiro, Alan
> Cc: Derek Pulvino; 200q20V mailing list
> Subject: Re: [200q20v] Re: Dist. Gear. was Bernie's "fix"
>
>
> Alan, I love stupid humor.  Keep it up, I'll play straight man.
>
> Re:  Dist. drive gear.
>
> I can furnish a sample of the dist with plastic gear.  If someone else does
> not volenteer a spare intake cam with gear, I will be able to do so soon,
> when I take the cover off of the 7A for my 3Bing project.
>
> As to materials, tell him to use any free machining steel that he likes to
> work with.  No post hardning necessary, as it is a very low load
> application.  Just needs to be a good fit, small back lash.  I'll forward my
> gear specs to you, in case that you did not see them.
>
> Where are you located?
>
> Bernie