[200q20v] chip question
Claus Vegener
vegener at post7.tele.dk
Fri Nov 30 17:16:32 EST 2001
I have done and described in the archives several times.
a) First get a on-the wheels test and measure boost, Nm and Hp
b) Install the IA III boostsensor and chips
c) Do the test again.
You will have no change from 0 - 2500 rpm
then the curves continues so max is about 4200 rpm and + 50 Hp
and the + 50 Hp continues to 6.800 rpm.
0-60 miles standard is 6.7 sec
after 5.98 (summer, no octane boost)
winter 5.70.
No doubt about IA Stage III
Until short time ago, I had the curves from the roll-road at my
homepage. Now I have some from IA V
kind regards
Claus
http://home7.inet.tele.dk/vegener/
----- Original Message -----
From: "Chris Covington" <malth at umich.edu>
To: "copley one" <copley at SNET.Net>
Cc: "Fundsalo Racing" <fundsaloracing at yahoo.com>; <Zoot531 at aol.com>; <200q20v at audifans.com>; <s-car-list at yahoogroups.com>
Sent: Friday, November 30, 2001 4:41 PM
Subject: Re: [200q20v] chip question
> OK, so there's some difference. But has anyone quantified it? Maybe the
> "big" difference is only 10hp, who knows.
>
> Chris
> '91 200q20v
>
> On Fri, 30 Nov 2001, copley one wrote:
>
> > I have (VERY) recently driven two unchipped 1995.5 S6's as well as my
> > MTM Stage I chipped version.
> >
> > Big difference, throughout the RPM range.
> >
> > Paul K
> >
>
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v
More information about the 200q20v
mailing list