[200q20v] RE: [s-cars] Delrin/ urethane bushing alternative

Bernie Benz b.m.benz at prodigy.net
Tue Oct 2 23:11:54 EDT 2001


So, the engine problems will temporarly mask the suspension bushing
problems.  That's good!

Bernie

> From: "Kaklikian, Gary" <Gary.Kaklikian at compaq.com>
> Date: Tue, 2 Oct 2001 20:46:28 -0600
> To: "Audi 20V (E-mail)" <audi20v at rennlist.org>, "s-car-list at egroups.com
> (E-mail)" <s-car-list at yahoogroups.com>, "200q20v (E-mail)"
> <200q20v at audifans.com>, "Brandon Hull" <brandon at cardinalventures.com>
> Subject: [200q20v] RE: [s-cars] Delrin/ urethane bushing alternative
> 
> I spoke with Shine Racing earlier this year about control arm bushings
> for my 4000tq.  They said they could fit their Teflon bearings to this
> application.  At the time, I had poor luck with urethane bushings and
> switched to delrin.  Well, after less than 10 track days, the delrin
> bushings have begun to creak and apparently there is some deflection
> occuring since handling does not seem quite as precise as before. Yet,
> all of the control arm bolts are tight. So, I plan to contact Shine
> Racing again to see what they can do and, if necessary, send them a new
> set of control arms to fit their bearings to.
> I'll keep you posted on how this works out, but since I've also got
> engine problems with the car now, it will be a while.
> 
> HTH
> Gary Kaklikian
> '86 4ktq
> '92 S4 
> 
> 
>> ----------
>> From:  Brandon Hull[SMTP:brandon at cardinalventures.com]
>> Sent:  Tuesday, October 02, 2001 7:31 AM
>> To:  Audi 20V (E-mail); s-car-list at egroups.com (E-mail); 200q20v
>> (E-mail)
>> Subject:  [s-cars] Delrin/ urethane bushing alternative
>> 
>> I happened upon this fascinating site today:  Shine Racing, a VW tuner
>> in MA
>> makes a needle bearing bushing insert for suspension control arms.
>> The
>> advantage would be near zero friction in the suspension movement, with
>> zero
>> play.  (maybe a bad thing as has been discussed, if we assume mass
>> production engineering factors in some slop here to accomodate
>> production
>> variances)  
>> 
>> In any event, I'm curious to know if anyone has pursued this for Audi
>> applications.
>> http://www.srsvw.com/basic.htm
>> 
>> A step by step Porsche installation:
>> http://www.all914.com/projects/ScottY/Part1/index.htm
>> 
>> Brandon Hull
>> eS2
>> 911SC
>> 
>> To unsubscribe, email: s-car-list-unsubscribe at yahoogroups.com
>> 
>> Your use of Yahoo! Groups is subject to
>> http://docs.yahoo.com/info/terms/
>> 
>> 
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v




More information about the 200q20v mailing list