[200q20v] stumbling when I left

[Gaidos, A.]

 To update this problem, it looks like the 7mm line that runs along the air
intake from the bypass valve to the manifold was broken in two. It was under
the intake tube behind the heat shield for the turbo. I found it was split
when I checked where that line ran to. A little tug explained it.
 So it appears not to be the turbo bypass valve but related plumbing,
Anton
Wife's '91 200q mechanic

-----Original Message-----
From: Phil Rose [mailto:pjrose at frontiernet.net]
Sent: Friday, August 31, 2001 9:17 AM
To: agaidos at got.net
Cc: 200q20v at audifans.com
Subject: Re: [200q20v] stumbling when I left


At 8:08 AM -0700 8/31/01, agaidos at got.net wrote:
>  I drove my wife's 200q20vt to work today and I notice it stumbles and is
a
>little jerky when I lift the throttle. The heavier I'm on the gas the more
it
>seems to jerk around when I lift. I noted some of the indicater lights
flash
>briefly as well, as if the motor might be dying and then compression
starting.
>This happened twice today.
>  Unrealated to this my wife is considering selling this car. She wants $9k
but
>I'm telling her $7.5K is more reasonable.
>Thanks
>Anton
>
>http://gaidos.got.net/Carol's/audi_pics/index.htm


Oh, and I'll take several 8x10 prints of Picture 1 (Carol09.jpg), if
you please. :-)

Phil
--

Phil Rose				Rochester, NY
'91 200q				mailto:pjrose at frontiernet.net