[200q20v] In Situ Valve Spring Compressor for Audi S5 Enginesfrom shop scrap

[Bernie Benz]

Sounds like it should be 100%.  The better things of life tend to run
together.

Bernie

> From: "Mike Miller" <MikeMilr at blackfoot.net>
> Date: Sat, 22 Sep 2001 23:10:04 -0600
> To: "Bernie Benz" <b.m.benz at prodigy.net>
> Cc: "200q20V mailing list" <200q20v at audifans.com>, "audi-20v"
> <audi20v at rennlist.org>
> Subject: Re: [200q20v] In Situ Valve Spring Compressor for Audi S5 Enginesfrom
> shop scrap
> 
> LOL - less than 5% of the people use MACs and less then 5% drive Audi's.
> You figure the odds of someone on this list using a MAC <g>
> 
> mike
> ----- Original Message -----
> From: "Bernie Benz" <b.m.benz at prodigy.net>
> To: "Kneale Brownson" <knotnook at traverse.com>
> Cc: "Chris Miller" <C1J1Miller at aol.com>; "200q20V mailing list"
> <200q20v at audifans.com>; "audi-20v" <audi20v at rennlist.org>
> Sent: Saturday, September 22, 2001 6:00 PM
> Subject: Re: [200q20v] In Situ Valve Spring Compressor for Audi S5
> Enginesfrom shop scrap
> 
> 
>> Gosh, I thought everyone used Macs.
>> 
>> It took awhile.  I'm not familar with this conversion stuff.  Here it is
> in
>> JPEG format, but had to save it as a PICT file first.  Let me know how it
>> looks.
>> 
>> Bernie
>> 
>>> From: Kneale Brownson <knotnook at traverse.com>
>>> Date: Sat, 22 Sep 2001 16:17:27 -0400
>>> To: Bernie Benz <b.m.benz at prodigy.net>
>>> Subject: Re: [200q20v] In Situ Valve Spring Compressor for Audi S5
> Engines
>>> from shop scrap
>>> 
>>> Can you supply your attachment in some other format, Bernie?  I can't
> open
>>> it in PaintShop Pro, Corel Draw, MS Paint, Photo Editor, etc.  Will your
>>> Claris Works convert it to JPEG or bitmap?
>>> 
>>> Thanks, Kneale
>>> 
>>> 
>>> At 11:52 AM 09/22/2001 -0800, you wrote:
>>> 
>>>> Hi Chris,
>>>> 
>>>> Here is an addition to your web site repair section that may be useful
> for
>>>> anyone wishing to replace valve stem seals in situ.  The attachment is
> a
>>>> Claris Works 5.0 draw document, my first simple attempt at CAD.
>>>> 
>>>> Regards,
>>>> 
>>>> Bernie Benz
>>>> Gardnerville, NV
>>>> 
>>>> '90 90Q-20V  140K
>>>> '91 200Q-20V 140K
>>>> Ford "Quatro" Tractor
>>>> Other Misc. Toys
>>>> 
>> 
>> 
>