[200q20v] shifter mechanism

[Max Conover]

Chris,

Were is this bolt that you are speaking about ? I have the same problem
right now.

Thanks,
Max

Chris Covington wrote:

> That's funny, I had the same exact problem except lost 1,3, and 5.  I
> think I'd prefer your loss over mine, I hated slipping the clutch so
> much in 2nd to get it to roll.
>
> Anyway, the problem most likely is this small bolt on top of the
> transmission (accessible by opening the hood and reaching down) on the
> shifter linkage that has come loose.  Simply tighten it (and apply
> locktite), and you're well on your way.
>
> I noticed another 200q20v wagon at Shokan that they just brought in had
> this same exact problem.  This and the fusible link for the rad. fan
> seems to be the most popular annoying 200q20v failures of 2001.
>
> Chris
> '91 200q20v
>
> -----Original Message-----
> From: 200q20v-admin at audifans.com [mailto:200q20v-admin at audifans.com] On
> Behalf Of Chuck Beacham
> Sent: Wednesday, September 19, 2001 9:29 AM
> To: 200q20v at audifans.com
> Subject: [200q20v] shifter mechanism
>
> i recently purchased a 200q20v  and that very night I lost 2,4, and
> reverse gears.  i believe that the ball below the shift rod is broken
> and think I have to replace the whole shifter mechanism.  Any info is
> much appreciated. Thanks.
>
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v