[200q20v] Rear Caliper Specs? Bentley is confusing me..

[Kneale Brownson]

Minimum thickness specs for rotors should be stamped into the exterior face 
of the nonwear portion (where the wheel bolts go).



At 11:05 AM 09/30/2001 -0400, Calliope wrote:

>The Bentley says the rear disk should be between 10 and 8 mm thick. Is
>that the total thickness of the disk, or the thickness of just one of
>the faces?
>
>My disk is about 20mm in total thickness, which makes no sense compared
>to the specs, but if I measure the individual faces (seperated by the
>ventilation gap), they are each about 6.5mm thick.
>
>Time for new disks, or what...?
>
>Thanks
>
>Tom F.
>'91 200q20v Avant...back in the garage.
>
>_______________________________________________
>200q20v mailing list
>200q20v at audifans.com
>http://www.audifans.com/mailman/listinfo/200q20v
>
>
>
>---
>Incoming mail is certified Virus Free.
>Checked by AVG anti-virus system (http://www.grisoft.com).
>Version: 6.0.282 / Virus Database: 150 - Release Date: 09/25/2001
-------------- next part --------------

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.282 / Virus Database: 150 - Release Date: 09/25/2001