which port is for the bleeder?

[Ingo D. Rautenberg]

Of course, I'd also feel better if others would check as well  'cause now
I'm not so sure mine are correct...as Bernie pointed out logically the
bleeder screw should be at the top (though it can also depend on the
internal brake fluid passageway inside the caliper).

Ingo
----- Original Message -----
From: "Ingo D. Rautenberg" <ingo at waratap.com>
To: <200q20v at audifans.com>; "Brett Dikeman" <brett at cloud9.net>
Sent: Wednesday, April 10, 2002 5:31 PM
Subject: Re: which port is for the bleeder?


Yup.  Top 45° is for the brake line and 90° just below it is for bleeder.
Just to make sure I checked both of mine on the car.

Ingo

----- Original Message -----
From: "Brett Dikeman" <brett at cloud9.net>
To: <200q20v at audifans.com>
Sent: Wednesday, April 10, 2002 5:04 PM
Subject: which port is for the bleeder?


> After spending 45 minutes getting the piston back into the caliper, I
> realized I don't remember which port on the back of the caliper is
> for the bleeder.
>
> I'm pretty sure the angled port is for the brake line, but I'd like
> to be sure, obviously :-)
>
>
> B
> --
> ----
> "They that give up essential liberty to obtain temporary
> safety deserve neither liberty nor safety." - Ben Franklin
> http://www.users.cloud9.net/~brett/
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v
>

_______________________________________________
200q20v mailing list
200q20v at audifans.com
http://www.audifans.com/mailman/listinfo/200q20v