Rear Camber links in the 44 chassis

[Shayne]

IBID, just BTDT.

Shayne P.


Oakland, CA.

Enough Audis to give plenty of headaches.

Parting:  1972 Mercedes Benz 280 SE 4.5

> From: Bernie Benz <b.m.benz at prodigy.net>
> Date: Tue, 13 Aug 2002 14:59:51 -0700
> To: Kneale Brownson <knotnook at traverse.com>, Igor Kessel <igor at s-cars.org>
> Cc: 200q20V mailing list <200q20v at audifans.com>
> Subject: Re: Rear Camber links in the 44 chassis
>
> Either or both rod ends can be removed from the link and relu;bed or
> replaced, BTDT.
>
> Bernie
>
>> From: Kneale Brownson <knotnook at traverse.com>
>> Date: Tue, 13 Aug 2002 16:01:39 -0400
>> To: Igor Kessel <igor at s-cars.org>, Audi Q-list <quattro at audifans.com>
>> Cc: Audi 200q20v list <200q20v at audifans.com>
>> Subject: Re: Rear Camber links in the 44 chassis
>>
>> --
>> Aren't those supplied with the bushing material already installed on the
>> link?
>>
>> At 02:13 PM 08/13/2002 -0400, Igor Kessel wrote:
>>
>>> Folks,
>>> last I checked, they were not rebuildable. Perhaps it has changed since?
>>> Is there a way to replace the bushing on the wheel hub side of the link
>>> separately?
>>>
>>> --
>>> Igor Kessel
>>> two turbo quattros
>>> _______________________________________________
>>> 200q20v mailing list
>>> 200q20v at audifans.com
>>> http://www.audifans.com/mailman/listinfo/200q20v
>> --
>>
>> _______________________________________________
>> 200q20v mailing list
>> 200q20v at audifans.com
>> http://www.audifans.com/mailman/listinfo/200q20v
>
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v