200-20V w/ V8 front anti roll bar.

[Bernie Benz]

Dave,

I remeasured my 200 bar in a straight section and it may well be 26mm, if I
were to remove the paint.  So, an upgrade to 28m should increase the front
roll stiffness by 35%, a significant difference!

Do you know if the '92 S4, which had a rear sway bar, also used the 28mm
front bar?  Did the V8 use a rear bar?

FYI, mlp qwest <mlped at qwest.net> posted to the 200-20V list on 7/21/01 a
parts list for adapting the S4 rear stabilizer bar to the 200.

Bernie

> From: Djdawson2 at aol.com
> Date: Wed, 11 Dec 2002 19:19:02 EST
> To: b.benz at charter.net
> Cc: 200q20v at audifans.com
> Subject: Re: 200-20V w/ V8 front anti roll bar.
>
> --
> [ Picked text/plain from multipart/alternative ]
> Bernie,
> From what I understand (and measured on my car), the stock bar is a 26mm.
> The difference is significant.  I've done it to both the 200s I've owned.
> Add one to the rear??  What can I add?
>
> Dave
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v