[200q20v] Re: Oil Pan Baffling

[Phil and Judy Rose]

At 3:48 PM -0500 2/3/02, Huw Powell wrote:
>  > Can someone please confirm for me, before I order the parts,
>>  that the UrS windage tray, which I assume is the part in the
>>  family album labeled "restrictor" in the "oil sump" diagram,
>
>034 103 623 A
>
>>  will fit w/o modification on a '91 200q20v, just needing two
>>  additional gaskets.
>
>that I do not know with any certainty, but here's a photo, and if it
>matches your oil pan (cast?) no alterations should be necessary.  If the
>"wings" do not match your oil pan (stamped), you will have to cut them
>off to allow proper mounting of the engine/tranny damper.
>
>http://www.humanspeakers.com/cgi-bin/humanspeakers/audi_img.pl?image=windage1.jpg&desc=Windage%20tray%20(034%20103%20623%20A)


The 3B sump has a "windage tray" already, so isn't that "restrictor"
the only additional part you want/need in order to modify the sump?

However the Family Album shows that the stock 3B sump contains its
own "restrictor" plate which appears to be bolted to the bottom of
the sump. Does this need to be removed? Or would the urS restrictor
simply be an addition to the existing setup?

Phil
--
*********************************
*  Phil & Judy Rose           Rochester, NY  *
*        mailto:pjrose at frontiernet.net       *
*********************************