[200q20v] Drive shaft alignment?

[Fundsalo Racing]

If you re-install the exact same spacers in the exact
same locations you should be OK. There should be
pretty clear marks where they were located WRT
side-to-side location. Pay attention during dissassy
and bag/mark parts.

--- "Reid, Les C." <Les.Reid at Centrilift.com> wrote:
> Recently had a vibration in the drive shaft and a
> major oil leak at the
> flange seal.
> I replaced the final drive seal and bearing and
> re-lubed the front CV joint
> of the drive shaft.
>
> Now for re-installation, the Bentley says to have a
> special tool to hold the
> drive shaft straight.
> I did not have said tool and was running out of time
> so I put it back on
> with eyeball method. The vibration sound is gone.
> But when I have some time
> I would like to check the shaft alignment.
>
> Need an easy method to align drive shaft.
> String? 2x4? any BTDT?
>
> Thanks
> Les Reid
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v


=====
-glen

OOOO

The power of Great Britain was "irresistible" and would destroy all who stood in the way, Sewall warned. "I have faith that the rebellion will shrink back to its native hell, and that Great Britain will rise superior to all the gasconade of the little, wicked American politicians."

1774, Sewall to John Adams immediately prior to his permanent return to England

__________________________________________________
Do You Yahoo!?
Send your FREE holiday greetings online!
http://greetings.yahoo.com