[200q20v] 3B/AAN Windage trays

[Bernie Benz]

I've always just used silicone caulk for pan and valve cover gaskets, for
exhaust and intake manifolds also.  I've had Lancia twin cams running with
the head gasket being the only solid gasket in the engine.  No big deal, and
a lot easier.

Bernie

> From: "Archibald, Jon" <JArchibald at whpacific.com>
> Date: Thu, 10 Jan 2002 12:45:11 -0800
> To: "'Fundsalo Racing'" <fundsaloracing at yahoo.com>, "Archibald,
> Jon"<JArchibald at whpacific.com>, "'200q20v at audifans.com'"<200q20v at audifans.com>
> Cc: "'t44tq at mindspring.com'" <t44tq at mindspring.com>
> Subject: RE: [200q20v] 3B/AAN Windage trays
>
> Actually, I think this is probably a very similar application. My impression
> is that the 3b/2b in-pan baffle is attached inside the pan. One thing I do
> have to offer is that apparently only Audi pan gaskets will seal correctly,
> so when using two of them, it is key to use the ones from the dealer.
>
> -----Original Message-----
> From: Fundsalo Racing [mailto:fundsaloracing at yahoo.com]
> Sent: Thursday, January 10, 2002 11:41 AM
> To: Archibald, Jon; '200q20v at audifans.com'
> Cc: 't44tq at mindspring.com'
> Subject: Re: [200q20v] 3B/AAN Windage trays
>
>
>
> Not directly applicable, but on the NF-code engine in
> my 84 4KQ R-R car I used both a factory in-pan baffle
> as well as the 2B windage tray. Used two pan gaskets,
> one on each side of the 2B windage tray.
>
> -
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v