[200q20v] 100 automatic gearshift sticks

[Kneale Brownson]

--
You don't have a B book for your 200q20v?

Which tranny is it?  There's a three-speed and a four-speed (087, 097), and
there are a couple preliminary steps before working on either.  In both, I
think, you have to remove the center console and the rear heater air
duct.  It looks like the gear shift knob unscrews off the shaft so you can
lift off the selector lever housing.  You already are aware the brake has
to be applied to shift into P, I assume.


At 03:44 PM 01/18/2002 -0500, Ingo D. Rautenberg wrote:

>OK, so it's not my 200q20v...sorry.  Something appears to be jammed in the
>gearshift selector on my mother's '91 100 Automatic.  It doesn't want to go
>into park.  I don't have the Bentley, but was wondering how to remove the
>gearshift plate/cover.  I removed the 8mm screw that attaches the console by
>the handbrake button to no avail...
>
>Ingo
>
>_______________________________________________
>200q20v mailing list
>200q20v at audifans.com
>http://www.audifans.com/mailman/listinfo/200q20v
--