200q20v digest, Vol 1 #1023 - 11 msgs]

motogo1 motogo1 at cox.net
Mon Jul 15 09:53:13 EDT 2002


That would be the backup light switch. Shouldn't matter which wire goes to
what spade connector.

Gary Martin
CT-USA
94 UrS4
91 200 TQA

----- Original Message -----
From: "Neil Vonhof" <nhvonhof at attbi.com>
To: <200q20v at audifans.com>
Sent: Sunday, July 14, 2002 8:53 PM
Subject: [Fwd: Re: 200q20v digest, Vol 1 #1023 - 11 msgs]


> Found a wire unplugged. Two wires blue/black and red/blue (or maybe
> red/black) go
> to a sensor located directly above the passenger side front axle on the
> trans/axle
> case. In reaching down there I pulled both wires off. Question #1: What
> sensor is
> this?  Question #2: Which wire goes on which spade connector on the
> sensor?
> I'm hoping that it doesn't matter which wire goes on which.
> Any help is greatly appreciated.
> Neil Vonhof
> Seattle
> '91 200q20v Sedan, 140,000 miles
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v





More information about the 200q20v mailing list