[V8] Re: The 2079 Tool

[Kneale Brownson]

--
So the male Tang (what DO you call the part that fits into the female part
of a socket drive or extension bar?) on a torque wrench may not be parallel
with the long arm of the wrench?

At 08:45 AM 07/18/2002 -0400, QSHIPQ at aol.com wrote:

>--
>[ Picked text/plain from multipart/alternative ]
>The reason it is "starred" is so that the torque wrench can be parrellel with
>2079.  Which it must be to get an accurate torque reading.
>
>Scott J
>In a message dated 7/17/02 4:38:21 PM Central Daylight Time,
>knotnook at traverse.com writes:
>
>
>For anyone else with the tool:   Bob Rosato came up with the answer:  The
>odd hole in the handle of the 2079 accepts a 3/4" drive.  So you could use
>it with a 3/4" drive torque wrench.  Or a 3/4" drive breaker bar.  It's an
>odd hole because it's made to accept the 3/4" drive at several different
>angles.  Kind of like those famous Audi triple square bolts, eh?
>
>_______________________________________________
>Audifans v8 mailing list
>Send posts to: mailto:v8 at audifans.com
>Unsubscribe or Manage your list options at
>http://www.audifans.com/mailman/listinfo/v8
--