Benz Brace

[Bernie Benz]

If a DIY, the design is on the S-cargo list.

Bernie

> From: "TM" <t44tq at mindspring.com>
> Date: Tue, 4 Jun 2002 17:42:17 -0400
> To: "'Claus Vegener'" <vegener at post7.tele.dk>, "'Bernie Benz'"
> <b.m.benz at prodigy.net>
> Cc: "'audifan20v'" <200q20v at audifans.com>
> Subject: RE: Benz Brace
>
> Claus-
> Instead of doing this, for track use, I'd suggest getting camber plates
> and adjusting the alignment either at the track or just before you go.
>
> -0.5 for track use is nowhere near enough. I'm running -1.5 and for
> autox,
> it isn't enough- I'd run at least -2.0 at the track.
>
> I'm seriously considering camber plates for my car- that way I can run
> -2
> for track use, then go back to a sane setting (maybe -0.5 or -0.75) for
> street use. I like having a little negative camber even for street use-
> car
> turns in better.
>
> 2Bennett and Euro-Car Service both sell camber plates.
>
> Taka
>