200q20v digest, Vol 1 #967 - 13 msgs

[Greg Johnson]

Taka,

Are you sure Euro-Car has these.  I contacted them about these a few
other products and the said the was never enough call for them - hence
they had none.  If this has changed, I'd like to know.  More
importantly, I'd like to hear from someone who is actually using this
product.

Greg "Can't get negative" Johnson

>Message: 4
>From: "TM" <t44tq at mindspring.com>
>To: "'Bernie Benz'" <b.m.benz at prodigy.net>
>Cc: "'200q20V mailing list'" <200q20v at audifans.com>
>Subject: RE: Benz Brace
>Date: Tue, 4 Jun 2002 21:08:17 -0400
>
>Igor's mod merely allows you to relocate the mounting holes
>to get back to factory camber settings, which is precisely not
>what you want for track use. The Euro-Car camber plates allow
>for both, just at a much higher cost. For street use, the redrilling
>of the factory would be the way to go. If one wanted to use the
>car for street and track, then the camber plates I'm talking about
>is the way to go. There is enough room to go to -2.0 w/ the plates.
>
>Then again, E36s can go to -3.0 with a very similar suspension, although
>the exact design differs.
>
>Taka
>