[s-cars] GP for Samco Hoses, Update and Inut needed!

Chris Covington malth at umich.edu
Tue May 14 18:41:50 EDT 2002


Taka et al,

I agree WRT the Eurocar upper intercooler hose.  You really have to work &
move the intercooler forward to get it to mount, but once on there it
won't blow off, that's for sure.  The lower intercooler, which I've also
installed, is a much better fit and seems to be functioning properly.

Chris
'91 200q20v

On Tue, 14 May 2002, TM wrote:

> Let me note that the current Samco spec, as supplied by Euro-Car
> service,
> gives you an upper intercooler hose that is a few mm too short and not
> properly
> curved, making it a real bitch to install. I am not happy with mine in
> that
> regard. If you all are doing a group buy and can get Samco to redesign
> the hose
> to a proper specification, I'm in.
>
> I have yet to install the lower hose, so I can't tell you how bad/good
> that one
> is.
>
> Taka
>
> -----Original Message-----
> From: James Murray (LMC) [mailto:James.Murray at ericsson.ca]
> Sent: Tuesday, May 14, 2002 5:12 PM
> To: 'TM'; 'Dan Simoes'; '200 20v'
> Subject: RE: [s-cars] GP for Samco Hoses, Update and Inut needed!
>
>
> Taka is of course right...but according to the Samco web site they do
> carry the following:
>
> TCS147 Turbo Quattro 20v (2)
>
> I gather that means two hoses.
>
> Cheers, /James.
>
> 	-----Original Message-----
> 	From:	TM [SMTP:t44tq at mindspring.com]
> 	Sent:	May 14, 2002 4:39 PM
> 	To:	'Dan Simoes'; 'James Murray (LMC)'; '200 20v'
> 	Subject:	RE: [s-cars] GP for Samco Hoses, Update and Inut
> needed!
>
> 	Unfortunately, hoses are not the same, none of them. :-(
>
> 	Taka
>
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v
>




More information about the 200q20v mailing list