Clean the MAss Air flow Wire K & N Filter oil

[davidb01]

Frobbing?...  I'm not familiar with that one  (nor is my spell check or
thesaurus)  ;-)

David

 -----Original Message-----
From: 	200q20v-admin at audifans.com [mailto:200q20v-admin at audifans.com]  On
Behalf Of Brett Dikeman
Sent:	Wednesday, November 06, 2002 11:13 PM
To:	SuffolkD at aol.com; 200q20v at audifans.com
Cc:	PeterBergin at aol.com
Subject:	Re: Clean the MAss Air flow Wire K & N Filter oil

At 11:47 PM -0500 11/6/02, SuffolkD at aol.com wrote:
>Can you clean the wire?


Yes and no.  Some comes off, but since the wire is cleaned(courtesy
being heated to white-hot) every time the engine is shut off, pretty
much anything that isn't vaporized gets nicely bonded to the wire,
which I think is glass-coated platinum or bare platinum.  The wire is
very thin and you don't want to go frobbing it.

I have a dead MAF sitting around somewhere from a lister who sent it
my way, in hopes of maybe being able to clean it.  Didn't work.  I
got a little residue off the wire, but not nearly all of it.

All the contamination was from the -engine- side, if I remember
correctly.  We never figured it out.  There was a ton of oil built up
on the screen...again, engine side and only the side facing the turbo.

Brett
--
----
"They that give up essential liberty to obtain temporary
safety deserve neither liberty nor safety." - Ben Franklin
http://www.users.cloud9.net/~brett/
http://www.apple.com/switch/
_______________________________________________
200q20v mailing list
200q20v at audifans.com
http://www.audifans.com/mailman/listinfo/200q20v