washer jet

[Phil Rose]

At 2:19 PM -0500 11/8/02, Mike Sylvester wrote:
>I can't imagine that there is anything in the opening of the jet that you
>could damage with a pin.

I believe the alleged "pin" problem is not mainly in regard to
cleaning the nozzles but from trying to re-aim them. The lateral
force needed to change the nozzle direction can evidently damage (or
distort) the plastic and ruin the spray pattern (i.e., if using a
slender pin or needle). I've carefully re-aimed the nozzles by using
a  brad (nail) which was as thick as possible--with no ill effects.
YMMV

Phil
--

Phil Rose				Rochester, NY USA
'91 200q	(135 Kmiles, Lago blue)
'91 200q   (58 Kmiles, Tornado red)
	mailto:pjrose at frontiernet.net