Subframe bolt torque, was Re: [s-cars] More on audi wheel bolts/studs/torque

[wolff at turboquattro.com]

Right, good catch.
I should have been more careful. I was talking about specs for the urquattro
which I happen to be working on currently. 25 ft-lbs seems a little low.
Maybe the Bentley is wrong in this case?
Wolff
"Nobody can forget the sound." - Michele Mouton

----- Original Message -----
From: "motogo1" <motogo1 at cox.net>
To: "Audi 200" <200q20v at audifans.com>
Sent: Wednesday, October 23, 2002 12:04 PM
Subject: Subframe bolt torque, was Re: [s-cars] More on audi wheel
bolts/studs/torque


> I just did the subframe bushings on my 200. Torque spec in Bentley is 48
> ft-lbs, plus 1/4 turn. S4 spec is 81 ft-lbs, plus 1/4 turn.
>
> Gary Martin
> CT-USA
> 94 UrS4
> 91 200 TQA
> ----- Original Message -----
> From: <wolff at turboquattro.com>
> To: "200q20v" <200q20v at audifans.com>
> Sent: Wednesday, October 23, 2002 7:31 AM
> Subject: Re: [s-cars] More on audi wheel bolts/studs/torque
>
>
> > That is the specified dry procedure for subframe bolts. Torque to 25
> ft-lbs,
> > plus 1/4 turn....
> > Wolff
> > "Nobody can forget the sound." - Michele Mouton
> >
>
>
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v