distributor metal gear replacement trip report

[Bernie Benz]

Did you not have my install instructions for gear replacement?  The plastic
gear removal is an easy job not requiring a press if done per.

Bernie

> From: "Brian Link" <BrianL at starsys.com>
> Date: Wed, 2 Apr 2003 10:27:26 -0700
> To: <200q20v at audifans.com>
> Subject: distributor metal gear replacement trip report
>
> I did mine this weekend and all went well.  The three hardest parts were
> removing the anti-tamper cover, removing the nut to remove the clamp and
> pressing out the pin on the old gear.
> 1.  Long screw driver and mallet to bend/tear it off the cover.
> 2.  I Used an inspection mirror and a 13mm crows foot wrench to remove
> the clamp hardware,
> 3. I needed an arbor press to remove the old pin and plastic gear plus a
> lot of force.  Also the new metal gear had a tight slip fit, so I
> pressed it on the shaft.  Everything fit and worked great.  Thanks DP
> and BB
>
> It took me about 2.5 - 3 hours of work.
>
> Brian Link
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v