Front suspension needed!

[QSHIPQ at aol.com]

--
[ Picked text/plain from multipart/alternative ]
91 200 vs 5ktq:  Different ball joint, different brake carrier, different
hub, different wheel bearing, different upper camber bushing, different upper
camber plate, different control arm, different ABS sensor.  The top nut for
the strut is the same... :)

5ktq parts were not used in the factory ufo conversions.  I've seen them (er,
"custom") fitted on occasion, but requires more work for a subpar kit than
it's worth IMO.  The 92 S4 is a drop in, btdt.

HTH

Scott Justusson
In a message dated 4/16/2003 1:36:27 AM Central Daylight Time,
linust at mindspring.com writes:

The difference is that the "factory" kit (dealer conversion) used '92 S4
struts
with G60 brakes.  While the 5000tq/200q10v struts may use G60 brakes as well,
the track is about 10mm narrower than the original or dealer converted 91
200q
or '92 S4, the brake rotor uses a shallower hat, and the ball joints are
smaller.

> -----Original Message-----
> From: 200q20v-admin at audifans.com
> [mailto:200q20v-admin at audifans.com] On Behalf Of Bernie Benz
> Sent: Tuesday, April 15, 2003 12:32 PM
> To: rberlin at feltonberlin.com
> Cc: 200q20V mailing list
> Subject: Re: Front suspension needed!
>
>
> What's the big diff, beyond the UFOs?
> Bernie
>
> > From: "Richard E. Berlin, Jr." <rberlin at feltonberlin.com>
> >
> > I have come to notice that the front
> > suspension uses 5000, not 200 20v parts.
>