Fuseable Link

[Kneale Brownson]

I replaced the boxes on both my 200q20v and my wife's V8 and installed them
with the boxes opening up.  That's the way I found them.  And since the
cover flaps both broke when I attempted to examine an expired fusible link,
I assume they were the factory originals.

At 01:53 AM 08/31/2003 -0500, BriceW at webtv.net wrote:
>Heres a dumb question.
>There was some discussion here recently
>about the fuseable link.
>I installed a new one some time ago.
>I wasnt sure to which way to install it.
>So I installed it with the flap opening up instead of down as I thought
>it would provide better protection from spills from filling the
>radiator,brake and hydraulic reservoirs.  If you install it opening down
>there are 2 openings on each side where stuff can get in.
>How was it installed from the factory?
>Also what is the extra screw holes for?
>Are they there to put a spare fuse?
>
>_______________________________________________
>200q20v mailing list
>200q20v at audifans.com
>http://www.audifans.com/mailman/listinfo/200q20v