Turbo afterrun fan relay part number

[Steven Hauptmann]

Does anyone know the part number for the after run fan relay?

My pump works opposite of what it should.  It stays on when cold and goes
off when hot. Temp switch and pump have both been replaced. Go figure?
I have to keep the temp switch disconnected to prevent the battery from
running dead.

Steve Hauptmann 
South Carolina

 -----Original Message-----
From: 	Bernie Benz [mailto:b.benz at charter.net] 
Sent:	Friday, November 28, 2003 6:15 PM
To:	Derek Pulvino
Cc:	200q20V mailing list
Subject:	Re: Turbo afterrun system question (different tack)


> From: "Derek Pulvino" <dbpulvino at hotmail.com>
> 
> As long as we're on the subject, does anybody if, or has anybody had luck
> with reasaling these pumps?  After doing the radiator, now the afterrun
pump
> is leakeing were the impeller housing joins the pump.  It looks like this
> car's going to be rebuilt, one piece at a time.
Hi Derek,
I've sucessfully resealed the impeller housing annular ring split joint
using ABS plastic pipe cement.  Wash and scrape out the joint area well
before flowing the cement into the joint.

Bernie

_______________________________________________
200q20v mailing list
200q20v at audifans.com
http://www.audifans.com/mailman/listinfo/200q20v