More Distributor thoughts

[QSHIPQ at aol.com]

Yes, ROD bearing shells, double up on the hardened ones found in AAN/RS2.  
BTW, the non hardened uppers supercede to the hardened ones, so audis already 
going after the "rebuilds".  The metal headgasket for the 20vt is also 
superceded (even in the aftermarket), but listers should be aware of NOS of both the 
above at the dealer and supply houses.

HTH

SJ
In a message dated 12/10/2003 2:36:07 AM Central Standard Time, 
mik at info.fundp.ac.be writes:
Scott,

I think you're rather talking about the rod bearing shells, not the crank 
bearing shells actually...

So far there's been no 3B with RS2 stuff on it that I've got my hands and 
my emulator in that hasn't had those and the ADU head gasket. It's easy, if 
someone is asking me for a remap on a 3B-RS2 setup, I simply tell them I 
won't touch the ECU if the rod bearings and head gasket aren't ADU spec.

Cheers,

Mihnea