eurolight connectors

[CL Wong]

>Holders are : 447972957

I don't have my parts invoice handy, but if this is
the same thing I received recently to re-do my euro
light wiring (I built my own wiring harness the first
time and this time used a wiring harness from
suvlights.com) I'd have to say you could do without
the connector-holders.

My connector-holders were small rectangular boxes with
4 compartments for the spade connectors.  

There's supposed to be a small lid on either side to
lock the spade connectors in place once you've
inserted them into the connector-holder but the hinge
on the lids are flimsy plastic that were broken or
even missing upon delivery.  I had the same problem
with the first set I received 4+ years ago.

In my opinion the holders are meant to isolate the 4
connectors (which are pretty close together).  If you
just buy the rubber boots it will look OEM so there
are no worries.. just use heat shrink tubing for
isolation.

just my 2 cents.

Chi

__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/