Euro Light Gremlins

[Ingo Rautenberg]

Woah!  I'm confused.  I thought the 9003's were just a stricter (less
variance) version of the H4 and that aside from no higher wattage versions
as available on the H4's, they were interchangeable.  As a matter of fact,
take a look at this... http://www.vrx.net/dsl/H4_bulletin.pdf

I know the connectors on a sealed beam bulb are not the same as when hooking
up an H4.  So you're saying the ground/ high beam and low beam locations are
different in a 9003 vs. H4?

-Ingo
'91 200q20v...Slightly modified
'84 Urquattro
'91 v8q 5-speed w/ lots of mods :-)
http://hometown.aol.com/quattringo/index.html


----- Original Message ----- 
From: <Djdawson2 at aol.com>
To: <mdeltergo at hotmail.com>; <mikemilr at blackfoot.net>
Cc: <200q20v at audifans.com>
Sent: Monday, December 29, 2003 2:58 AM
Subject: Re: Euro Light Gremlins


> You need to get the 9003 bulbs out of there.  Typically, the ground post
is
> located where a hot is on the euro lights.  I'm betting you are getting
> feedback that is tripping the relay.  Put in the right bulbs and I'll bet
your
> problem goes away.
> HTH,
> Dave (the previous owner of the failing lights!)
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.556 / Virus Database: 348 - Release Date: 12/26/2003